Details Of Data - Epson VT Series Manipulator Manual

8.4 Details of Data

The following data files are created by the Controller status storage function.
File Name
Backup.txt
CurrentMnp01.PRM
CurrentStatus.txt
ErrorHistory.csv
InitFileSrc.txt
MCSys01.MCD
SrcmcStat.txt
ProjectName.obj
GlobalPreserves.dat
WorkQueues.dat
MCSRAM.bin
MCSYSTEMIO.bin
MCTABLE.bin
MDATA.bin
SERVOSRAM.bin
VXDWORK.bin
All files related to
project except
ProjectName.obj *1
*1 Storage of "All files related to project except ProjectName.obj" can be specified by a setting.
VT Rev.1
Information file File with information for Manipulator restore.
for restore
Robot parameter Saves information such as ToolSet.
Save status Saves program and I/O status.
Error history
Initial setting Saves various settings of the Controller.
Robot setting Saves information of connected Manipulator.
Hardware Saves installation information of hardware.
information
OBJ file Result of project build.
Prg file is not included.
Global Preserve Saves values of Global Preserve variables.
variables
WorkQue Saves information of Queues information of the WorkQue.
information
Inner information
of Manipulator
Project When [Include project files when status exported] check
box is checked in EPSON RC+ 7.0 menu-[Setup]-
[System Configuration]-[Controller]-
[Preference], the project file is stored.
Includes program files.
Setup & Operation 8. Memory Port
Outline
75