Details Of Data - Epson T-B Series Manual

8.4 Details of Data

The following data files are created by the Controller status storage function.
File Name
Backup.txt
CurrentMnp01.PRM
CurrentStatus.txt
ErrorHistory.csv
InitFileSrc.txt
MCSys01.MCD
SrcmcStat.txt
ProjectName.obj
GlobalPreserves.dat
WorkQueues.dat
MCSRAM.bin
MCSYSTEMIO.bin
MCTABLE.bin
MDATA.bin
SERVOSRAM.bin
VXDWORK.bin
All files related to
project except
ProjectName.obj *1
*1 Storage of "All files related to project except ProjectName.obj" can be specified by a setting.
T-B series Rev.1
Information file
for restore
Robot parameter
Save status
Error history
Initial setting
Robot setting
Hardware
information
OBJ file
Global Preserve
variables
WorkQue
information
Inner information
of Manipulator
Project
T3-B T6-B Manipulator 8. Memory Port
Outline
File with information for Manipulator restore.
Saves information such as ToolSet.
Saves program and I/O status.
Saves various settings of the Controller.
Saves information of connected Manipulator.
Saves installation information of hardware.
Result of project build.
Prg file is not included.
Saves values of Global Preserve variables.
Saves information of Queues information of the WorkQue.
When [Include project files when status exported] check box
is checked in EPSON RC+ 7.0 menu-[Setup]-
[System Configuration]-[Controller]-
[Preference], the project file is stored.
Includes program files.
97