GETTING STARTED
3.6.1.2. M501-TRS Alarm Output Connections
24
Teledyne API - T102/501 TRS, Addendum to T101 Operation Manual
The rear panel of the M501-TRS includes a terminal strip by which connections can be
made to the converter's internal temperature alarm. For information on adjusting this
alarm see Section 7.5).
Connect the input leads of your alarm-sensing device (e.g. datalogger)
•
to the center two pins of the alarm output connector (see).
Make sure the load does not exceed the rated capacity of the relay.
•
07267B DCN6485