Table 7-1. M501-Trs Temperature Controls And Definitions - Teledyne T102 Operation Manual

M501-TRS OPERATING INSTRUCTIONS

Table 7-1. M501-TRS Temperature Controls and Definitions

NAME
Process Value
Set Value
Select Key
Set value
Indicator
Up Key
Down Key
Autotune
Indicator
Control
Indicator
Alarm
Indicator1
(AL1)
Alarm
Indicator2
(AL2)
44
A 4-digit, 7 segment LED display on which the current value of the PV and as
well as error codes and programming parameters and data are all displayed.
A 4-digit, 7 segment LED display which shows the current value of the SV. It
also displays the the parameter settings in parameter setting mode
It flickers during Standyby Mode.
This key is used to switch between the 1
sued to switch between the parameter and the data at the 1
block.
st
To access the 1 parameter block press and hold the select key for 1 sec.
nd
To access the 2 parameter block press and hold the select key for 3 sec.
d
To access the 3r parameter block press and hold the select key for 5 sec.
To return to the main display after entering a paremeter block press and hold
the key for 2 sec.
Used to confirm parameter value changes by pressing once.
Is lit indicates when a the set value (SV) is displayed.
Used to increase the numerical value. The numerical value is increased by
pressing the key once. The numerical value keeps oon increasing by pressing
the key continuously.
Used to search for parameters within the 1
Used to decrease the numerical value. The numerical value is increased by
pressing the key once. The numerical value keeps oon increasing by pressing
the key continuously.
Used to search for parameters within the 1
The lamp blinks while the PID autotuning or self tuning is being performed.
Lit when the controller is actively controlling the heater temperature.
Lit when the PV equals or exceeds the upper alarm limit.
Lit when the PV equals or falls below the lower alarm limit.
Teledyne API - T102/501 TRS, Addendum to T101 Operation Manual
FUNCTION
st nd
, 2 or 3
st nd
, 2
st nd
, 2
rd
parameter block. It is
st nd rd
, 2 and 3
rd
and 3 blocks.
rd
and 3 blocks.
07267B DCN6485