Checks And Actions Prior To Use; List Of Checks Prior To Start-Up - Still EXV 10 Basic Original Instructions Manual

4

Checks and actions prior to use

Checks and actions prior to use

List of checks prior to start-up

WARNING
Damage or other faults on the truck or attachments
(special equipment) can result in accidents.
If damage or other faults are noticed on the truck
or attachments (special equipment) during the
following inspections, do not use the truck until
it has been properly repaired. Do not remove or
disable the safety systems and switches. Do not
change the pre-set values.
CAUTION
Only use the truck if all of the covers are fitted
correctly and the covers and doors are closed
correctly.
CAUTION
Perform checks on a flat surface. Make sure that
there are no people or objects in the test zone in
front of and/or behind the truck.
CAUTION
Drive very slowly during the operational tests.
Ensure that the truck is in good working
condition prior to start-up. These checks
supplement and do not replace the scheduled
maintenance operations
• Check the area under the forklift truck for
leaking consumables.
• Check the condition of the forks(5) and other
load-carrying equipment to ensure they
show no noticeable damage (e.g. bends,
cracks, significant wear).
• Check that the uncovered sections of
hydraulic pipes and hoses are in good
condition and check them for leaks.
• The guard mesh or plastic screen (2) must
be intact and properly secured.
• Do not restrict the field of vision. Ensure the
visible areas specified by the manufacturer
are observed.
58
6
5
4
45728043430 EN - 05/2017
Application
1 1
2
3
0252_003-068