Application
• Attachment parts (special equipment) must
be properly secured and function according
to their operating instructions.
• Damaged or missing decals must be
replaced in compliance with the marking
position table.
• The roller guide rails must be coated in a
visible layer of grease.
• Check that the wheels (traction, load) are in
good condition. The wheels must not show
any sign of damage or heavy wear. They
must be correctly attached.
• Check that there are no objects, twine, etc.
blocking the operation of the wheels and
rollers (4).
• Make sure the horn works correctly.
• The battery cover (6) must be securely
closed.
• Make sure the cover is (3) present and
properly secured.
• Check that the chains (1) are undamaged
and evenly and adequately tensioned.
• Visually check that the various parts of the
truck are in good condition and correctly
positioned;
• Make sure that the anti-crush safety push-
button works correctly;
• Check that the buttons and throttle/s on the
tiller are working correctly;
• Make sure that the buttons and throttle
automatically return to their correct position
after release
• Check that the battery plug/outlet are
correctly positioned and intact;
• Make sure that the start/stop key works
correctly
• Check that the truck brakes and stops when
the throttle is released;
• Check that the truck brakes and stops when
the tiller is released;
• Make sure that the electromagnetic brake
works effectively;
• Check the automatic return of the tiller to
the vertical position with relative emergency
braking;
• Check the battery electrolyte level and den-
sity as indicated in the battery instructions;
45728043430 EN - 05/2017
Checks and actions prior to use
4
59
Need help?
Do you have a question about the EXV 10 Basic and is the answer not in the manual?