2
Residual risks
• Human error resulting from failure to
observe the safety guidelines.
• Unrepaired damage or defective and worn
components.
• Insufficient maintenance and testing
• Use of incorrect consumables
• Maintenance intervals exceeded
The manufacturer shall not be held responsi-
ble for accidents involving the truck caused by
the failure of the operating company to comply
with these regulations either intentionally or
due to negligence.
Stability
The stability of the truck has been tested
in accordance with up-to-date technical
regulations and is guaranteed if the truck is
used correctly and in line with the intended
purpose. These standards only take into
account the static and dynamic tipping forces
that can arise during use in accordance
with the operating standards and intended
purpose. In extreme cases there is a risk of
exceeding the moment of tilt due to improper
use or incorrect operation, which will affect
stability.
Risks can include:
• loss of stability due to unstable or sliding
loads etc.;
• turns at excessive speeds;
• moving with the load raised;
• moving with a load that is projecting to the
side (e.g. side shift);
• turning and driving diagonally across
slopes;
• driving on slopes with the load pointing
downhill;
• oversized loads;
• swinging loads;
• steps or ramp edges.
16
45728043430 EN - 05/2017
Safety
Need help?
Do you have a question about the EXV 10 Basic and is the answer not in the manual?
Questions and answers