Maintenance Plans - Still EXV 10 Basic Original Instructions Manual

5

Maintenance plans

Maintenance plans
Maintenance plans
Key to symbols in table:
• ▲ = Every 1000 hours or at least every
12 months (whichever comes first), unless
local regulations require more frequent
intervention.
ENVIRONMENT NOTE
During maintenance operations, follow the
instructions provided in the "Safety guidelines
relative to operating materials" section in
"Chapter 2".
Maintenance every 1000 hours
Transmission
Reduction gear: check that it is correctly mounted
Reduction gear: check for any oil leakage
Drive motor: check that it is correctly mounted
Forks
Check condition of forks
Grease the rods and levers
Check bushes and levers
Steering/wheels
Steering: visually inspect the mounting of the tiller
Steering unit bearing: grease (if there is a lubrication nipple)
Wheels
Wheels and rollers: check for any damage, foreign matter or signs of wear
Wheels: check that they are at the correct tightness
Rollers: check that they are correctly mounted
Brake
Electromagnetic brake: check for signs of wear and any adjustment
Check truck braking
Electrical system
Battery: check the battery condition and that it is correctly mounted
98 45728043430 EN - 05/2017
Maintenance