Controls For Switching On And Switching Off - Still EXV 10 Basic Original Instructions Manual

3
Instruments and controls
Controls for switching on and
switching off
Switching on and switching off are performed
using:
• the key switch (standard version)
• or the numeric keypad "Digicode" (optional
version)
Standard version with key
On the standard version, the key has three
positions:
• "0" position: Truck switched off.
• (2)"Tortoise" position: truck switched on
and truck speed limited.
• (3)"Hare" position: truck switched on and
standard (NOT limited) truck speed.
– To select the truck drive mode from the two
available modes ("Tortoise" or "Hare"), turn
the switch key to the desired position.
– To switch off the truck, turn the key to the "0"
position.
Version with "Digicode" (optional)
– On the optional version with Digicode: start
the truck by following the procedure de-
scribed in the relevant paragraph (Digicode
option).
Then, turn the selector to the desired position
depending on the desired drive mode:
• (2)"Tortoise" position: truck switched on
and truck speed limited.
• (3)"Hare" position: truck switched on and
standard (NOT limited) truck speed.
32
3
45728043430 EN - 05/2017
Overview
2
2343