Using The Truck With The "Tiller Always Active - Creep Speed" Function (Optional) - Still EXV 10 Basic Original Instructions Manual

Application
Reverse travel
– Press with your thumb on the upper part of
the throttle.
– The speed increases with the movement of
the throttle; speed is limited to 4 or 6 km/h
depending on the position of the key.
– When the control throttle is released, the
truck brakes electrically.
Using the truck with the "Tiller always
active — Creep Speed" function
(optional)
The "tiller always active" function can be
enabled when operating the truck in confined
spaces.
This function allows the truck to travel and the
forks to be lifted with the tiller in any position.
Unlike the standard version, by following the
instructions below, the truck functions (travel
and lifting/lowering of forks) are also active
with the tiller in the vertical position.
To enable truck lifting with the tiller in the
vertical position:
• Press and hold the button (3)
• Then press the fork lifting button
• Release the button (3) to disable this
function.
To enable travel with the tiller in the vertical
position:
• Press and hold the button (3)
• Then turn the throttle (4) in the desired
direction
• The truck activates creep speed. During
travel at creep speed with the tiller in the
vertical position and the button (3) pressed,
if the operator tilts the tiller to the work-
ing position (see ⇒ Chapter "Tiller posi-
tions", P. 3-34), creep speed is disabled and
the speed of travel of the truck increases in
line with the angle of the throttle (4).
• Release the button (3) to disable this
function.
NOTE
4
45728043430 EN - 05/2017
4
Driving
4
3
OM2283
71