Still EXV 10 Basic Original Instructions Manual page 57

Overview
ON
OFF
PROGRAMMING MODE — to be carried out with the truck switched off (2)
Operation
THE ADMINIS-
TRATOR CODE
* 0 0 0 0 0 0 0 0
IS IMPORTANT
FOR ALL DIGI-
CODE SETTINGS
New operator
code
Allocating
operator codes
Deleting operator
codes
Modifying
administrator
codes
Restoring
the initial
administrator
code
Activating the
automatic
switch-off
Setting the delay
of the automatic
switch-off
Deactivating
the automatic
switch-off
Stand-by
NOTE
The stand-by function is only available with
the Digicode option.
(by
* 1 2 3 4 5 #
default)
(3 seconds)
#
Key in
(by default)
#
* 0 * 4 5 6 7 8 #
* 2 * 5 4 3 2 1 #
* 2 * #
* * 9 * 1 2 3 4
5 6 7 8 #
* * 2 * 1 #
* * 3 * 6 0 #
* * 2 * 0 #
45728043430 EN - 05/2017
red off continuous
green (1)(PIN correct)
red flashing green off
(4)(PIN incorrect)
red off green
flashing (2)
LED status
continuous red
continuous green (3)
red off green flashing
(2) (code accepted)
red off green flashing
(2) (code accepted)
red off green flashing
(2) (deletion accepted)
red off green flashing
(2) (code accepted)
red flashing green
flashing (5) (5 s before
switch-off)
red off green flashing
(2)(value accepted)
red off green flashing
(2)(command accepted)
Options and variants
default
1 2 3 4 5
PIN code
Turn off the truck
Warning
Once the diodes have
been switched off,
the electronic key
automatically reverts
to "operating mode"
Example of a new
operator code: 45678
*2*: operator reference
10 options from 0 to 9
*2*: operator reference
(between 0 and 9)
To reactivate the default
administrator code
(00000000), please
contact your agent or
nearest dealer.
The power supply
switches off automati-
cally after 10 min. (600 s
by default) if the truck
is not being used.
Example: automatically
switches off after 1 min.
(60 s) if not used.
Minimum setting = 10 s
/ maximum = 3000 s
3
49