Instrument Functions; Turning The Instrument On/Off; Function Buttons - AEMC 1510 User Manual

1.3. Instrument Functions

The Model 1510 measures:
 Concentration of carbon dioxide (CO
 Ambient temperature
 Relative humidity
The instrument uses these measurements to determine and display the current comfort level.
DataView with the Data Logger Control Panel software can be installed on a computer to allow you to
configure the instrument, view measurements in real time, download data from the instrument, and create
reports.

1.4. Turning the Instrument ON/OFF


ON: Press the
 OFF: Press the
you cannot turn OFF the instrument when it is in HOLD or in recording mode.
In Portable mode, the instrument automatically turns OFF after 15 minutes of inactivity. This
feature is de-activated in other modes (1D or 3D, ECO, P_REC, MIN MAX, and M_REC), if
the instrument is actively communicating via Bluetooth or USB, or is running on USB power.

1.5. Function Buttons

On each button, a short press activates the top function and a long press (>2 seconds) activates the lower
function.
Button Function
 Short press enables 1D and 3D modes.

Long press changes temperature units.

Pressing this button while holding down
REC  Starts manual recording.
 Short press turns on the backlight.
 Long press enables/disables energy-saving mode.

Holding down this button and then pressing
buzzer.
 Short press freezes the display.
 Long press activates/deactivates Bluetooth.
 Short press enters MAX MIN mode; measurement values continue to be
displayed.
Second press displays the maximum value.
MAX
MIN Third press displays minimum value.
Fourth press returns to normal measurement operation.
 Long press exits MAX MIN mode.
Air Quality Meter Model 1510
) in the air
2
button.
button for >2 seconds when the instrument is ON. Note that
activates/deactivates alarm buzzer.
activates/deactivates alarm
7