Menu Buttons - AEMC OX 5022-CK Quick Start User Manual

ITEM BUTTON
9
10
Use of the Sensors
Distribution of stray capacitors:
Considering the stray capacitances, it is imperative to correctly connect the reference conductors for
each sensor. The conductors should preferably be connected to the cold points to avoid the transmis-
sion of noise by the stray capacitance between modes.
The noise of the digital ground (earth) is sent to the analog input by the stray capacitance.
NOTE: In order to prevent electric shocks or possible fires, never use accessories on which the
casing is accessible if it has a voltage of > 30Vrms compared to the ground.
Shop for AEMC products online at:
SENSITIVITy BUTTONS
- decreases the vertical sensitivity of the last selected channel down to 5mV.
- increases the vertical sensitivity of the last selected channel up to 200V.
NOTE: For the M channel, the "sensitivity" buttons vary the amplitude factor
but only if a math channel is validated.

MENU BUTTONS

- displays the main "Trigger" menu
- displays the main "Tools" menu
- displays the main "Acquisition" menu
- displays the main "Memory" menu
- displays the main "Measurement/Cursor" menu
- displays the "Help" window
ShopAEMC
www.
DESCRIPTION
.com 1.877.766.5412