2.6.4
Print Button
Before using this button, an external serial printer must be connected to the Model
8220 using the specific serial cable provided with the printer.
NOTE: Do not use the optical USB cable provided with the instrument, to connect
to the printer. Use the serial cable provided with the printer.
Pressing this button prints out all the information and measurements relating to the
currently selected mode.
NOTE: It is not possible to print while viewing a photograph.
When data is transmitting, the
Example of a print out when the rotary switch is turned to the
◄► Buttons
2.6.5
These buttons enable the user to:
•
Navigate between pages for the
•
Activate or de-activate the balanced three-phase mode for the
•
Select the step in the
16
icon flashes.
**************************
Mode:voltage
Vrms(V)= 225.7
Arms(A)= 112.8
Freq(Hz)= 50.00
Vdc(V)= 3.2
CF= 1.41
Vmax(V)= 229.4
Vmin(V)= 222.6
Vpeak+(V)= 319.6
Vpeak-(V)=-313.3
Figure 2-4
,
modes.
and
,
Power Quality Analyzer Model 8220
voltage mode:
modes.
mode.