Bus Configuration And Addressing - Festo CPX-FB6 Manual

2. Commissioning

2.1.4 Bus configuration and addressing

Festo P.BE-CPX-FB6-EN en 1207c
General commissioning instructions
Prior to commissioning or programming, create a configura-
tion list of all connected fieldbus stations. On the basis of this
list you can:
– carry out a comparison between NOMINAL and ACTUAL
configurations in order to detect connection faults.
– access these specifications during the syntax check of a
program, in order to avoid addressing faults
Configuration of the CPX terminal demands a very accurate
procedure, as different configuration specifications are some-
times necessary for each station on the Interbus, due to the
modular structure. Note here the specifications in the sec-
tions which follow.
2-27