Festo CPX-FB6 Manual page 48

2. Commissioning
2-8
Pneumatic modules and pneumatic interfaces
The valves are configured according to the pneumatic inter-
face used:
– Valves of type 12 (CPA), type 03 (Midi/Maxi) or type 44
(VTSA, ISO):
For expansion of the valve side, only one identifier is
used for the pneumatics interface. In the pneumatics in-
terface, the number of solenoid coils is set with a DIL
switch (grid pattern 1 byte).
– Valves of type 32 (MPA pneumatic modules):
From the technical point of view, the individual MPA pneu-
matic modules each represent an electric module with
digital outputs for controlling the attached valves. For
each pneumatic module of type MPA1, 8 outputs of type
MPA2, 4 outputs assigned, independent of how many
valves the pneumatic module is equipped with.
Additional information on MPA pneumatic modules can be
found in the description for the CPX I/O modules (P.BE-CPX-
EA-..) and the corresponding description of pneumatics.
Festo P.BE-CPX-FB6-EN en 1207c