Device Parametrisation With The Cmd Software - Festo CPX-FB6 Manual

2. Commissioning

2.2.2 Device parametrisation with the CMD software

Fig. 2/20: "Geräte-Parametrierung –Werte verändern" ( Device parametrisation – modify-
ing values)
Festo P.BE-CPX-FB6-EN en 1207c
With the device parametrisation via the CMD software, access
can be made to the assigned parameter bytes (function num-
bers) via the PCP index.
The parameter bytes can be modified according to the de-
sired parametrisation, and the modified parametrisation can
then be written into the CPX terminal.
The individual parametrisation undertaken can be saved
within the CMD software.
If a parameter file (*.dsc) with instructions is available, it can
be loaded in the CMD software.
2-49