Festo CPX-FB6 Manual page 56

2. Commissioning
2-16
In section 2.1.8 you will find instructions on addressing with
the CMD software (process data assignment) and on modify-
ing the position of the low and high bytes ("byte swap").
Examples for the address assignment of the CPX
terminal
The following examples show the assignment of the input and
output bytes to the individual modules. In the examples the
following applies:
– Configured input address:
configured output address:
– The address allocation is represented both in the Siemens
mode and in the Standard mode.
The address assignment within the individual I/O modules
can be found in the description for the I/O modules.
The address assignment within the pneumatics modules can
be found in the description for the valve terminal pneumatics.
The address assignment within the CP interface can be found
in the description for the CPX-CP interface.
IB20
OB20
Festo P.BE-CPX-FB6-EN en 1207c