2. Commissioning
2.1.6 Bus configuration with the CMD software
Festo P.BE-CPX-FB6-EN en 1207c
This section describes, as an example, the main steps within
the CMD software for inserting a CPX terminal in your project.
A general and comprehensive description can be found in the
corresponding manual for the CMD software. In the following
it is assumed that the user is familiar with the contents of the
CMD manual.
Note
Observe that software packages are often updated, so
modifications to the software may not yet be taken into
account in this description.
The examples used here for the screen displays have been
taken from CMD software version 4.50.
2-29