Parametrisation - Festo CPX-FB6 Manual

2. Commissioning
2.2

Parametrisation

Festo P.BE-CPX-FB6-EN en 1207c
You can set the behaviour of the CPX terminal as well as the
behaviour of individual modules and channels through para-
metrisation. A distinction is made between the following para-
metrisation types:
– System parametrisation, e.g. deactivating error messages
etc.
– Module parametrisation (module- and channel-specific),
e.g.: monitoring, settings in case of error, settings for
Forcing.
Parameters of the CPX terminal
An overview of the parameters available for the CPX terminal
can be found in appendix A.3.
A description of the functions of the individual parameters
can be found in the CPX system description.
Which module parameters are available for the various mod-
ules can be found in the description for the respective mod-
ule (e.g. description for CPX I/O modules (P.BE-CPX-EA-..)).
2-43