1. Installation
1-16
Remote bus floating
The bus node has been prepared for floating operation on the
remote bus. Check with the standards and guidelines (e.g.
VDE) valid for your application to ascertain whether your ap-
plication is appropriate for floating operation.
Additional information on installing an Interbus system can be
found in the Interbus user manual.
Phoenix Contact
Designation
IBS SYS PRO INST UM
Procurement source:
Phoenix Contact GmbH & Co.
Postfach 1341
D-32819 Blomberg, Germany
www.phoenixcontact.com
There is 9-pin sub-D plug (incoming remote bus) as well as a
9-pin sub-D socket (continued remote bus) on the bus node
for connecting the CPX terminal to the fieldbus.
These connections are used for the supply line and the con-
tinuation of the fieldbus line.
Article no.
27 43 79 2
Festo P.BE-CPX-FB6-EN en 1207c