Festo CPX-FB6 Manual page 28

1. Installation
1-12
Setting the diagnostic compatibility for MPA modules with
diagnostic function D2
With switch element 2 of the dual DIL switch 3, you can de-
termine whether the broken cable diagnostics (Open Load) is
reported. The setting of this DIL switch can be overwritten via
parameterisation.
Diagnostics
Filter broken cable error mes-
sage (Open Load)
Error in monitoring broken cable
(Open Load) is ignored.
Report broken cable error mes-
sage (Open Load)
Power OFF/ON is necessary after the DIL switch is changed during
operation. Changes by means of parameterisation are immediately
effective.
Tab. 1/6: Diagnostic function
3
Setting DIL switch 3.2
3.2: OFF
(default)
3.2: ON
Festo P.BE-CPX-FB6-EN en 1207c