Festo CPX-FB6 Manual page 75

2. Commissioning
Festo P.BE-CPX-FB6-EN en 1207c
10. If required, you can enter corresponding terms for identi-
fying the CPX terminal under "Stationsname" (Position
name), "Teilnehmername" (Station name), "Hersteller-
name" (Manufacturer name) and "Gerätetyp" (Device
type).
11. Representation:
You can individually adapt the representation of the CPX
terminal in the CMD software. However, this is not abso-
lutely necessary for commissioning.
With the button "Darstellung" (Representation), you can
open a dialogue window in which you can set a specific
icon for the CPX terminal.
The specific icons for CPX terminals can be found
– in the internet under www.festo.com
(Download Area – Fieldbus Utilities),
– on the Utility CD from Festo (in preparation).
Copy the files "CPX-01.ico" und "CPX-PCP.ico" into the
•
CMD directory \PICTURE\.
Actuate the button "Auswählen ..." (Select ...) in the
•
dialogue window "Darstellung..." (Representation...).
Select the entry "Icons (*.ico)" under "File type".
•
Fig. 2/14: Dialogue window "Ändern der Bildersammlung"
(Modifying the picture collection)
2-35