Configuring The Network Parameters For A Tcp/Ip Network; Configuring The Network Parameters For A Udp Plus Network; Configuring Ethernet Communications; Configuring Bluetooth Radio Communications - Intermec CK60 User Manual

Chapter 3 — Configuring the CK60 Computer

Configuring the Network Parameters for a TCP/IP Network

Configuring the Network Parameters for a UDP Plus Network

Configuring Ethernet Communications

Configuring Bluetooth Radio Communications

54
Your CK60 Computer supports these network protocols:
• TCP/IP
• UDP Plus
The next sections explain the parameters you need to configure for the
CK60 Computer to work in your wireless network.
In a TCP/IP network, the CK60 Computer communicates with a host
computer directly using TCP/IP. The access point acts as a bridge to allow
communications between the wired network and the wireless network.
To use wireless communications in a TCP/IP network, configure the Net-
work Name (SSID), Host IP Address, IP Settings (if not using DHCP),
and Network Port parameters on each CK60 Computer in the network.
In a UDP Plus network, the CK60 Computer communications with a host
computer through the Intermec Application Server.
The Intermec Application Server translates UDP Plus packets on the wire-
less network into TCP/IP packets on the wired network and vice versa. The
access point acts as a bridge to allow communications between the wired
network and the wireless network.
To use wireless communications in a UDP Plus network, configure the
Network Name (SSID), Controller IP Address, IP Settings (if not using
DHCP), and Network Port parameters on each CK60 in the network.
You can use the CK60 Computer directly in an Ethernet network if you
have ordered the Ethernet option on your CK60 Computer and you insert
it into a CK60 Dock. The communications dock as an Ethernet connector
that makes it possible for the CK60 Computer to communicate with your
Ethernet network.
To use the CK60 Computer in an Ethernet network, configure the Net-
work Name (SSID), Host IP Address, IP Settings (if not using DHCP),
and Network Port parameters on each CK60 Computer in the network. If
required for your network, set the Primary and Secondary DNS Server and
Primary and Secondary WINS Server parameters on each CK60 Computer
in the network.
"Bluetooth" is the name given to a technology standard using short-range
radio links, intended to replace the cables connecting portable and fixed
electronic devices. The standard defines a uniform structure for a wide
range of devices to communicate with each other, with minimal user effort.
CK60 Series Handheld Computer User's Manual