Table of Contents
Advertisement
5020 Data Collection PC User's Manual
TCP/IP Extensions Delayed Acknowledgement Timer
Purpose:
The delayed acknowledgement timer specifies the time that TCP will delay an
acknowledgement on the arrival of data. You can use the TCP/IP extensions commands
to fine tune the network performance in a wireless networking environment. After you
change this parameter, suspend and resume the 5020 to make the change effective.
Configuration:
Use one of these methods:
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Radio, then TCP/IP Extensions, and finally choose Delayed
ACK Timer. For help, see Chapter 3, "Configuring the 5020."
On Cold Boot:
Not saved
SNMP OID:
1.3.6.1.4.1.1963.5.15.5.3.1.3.index
where index is the radio adapter card number.
Options:
An acceptable value for the delayed acknowledgement timer is any number from 100 to
3000 ms.
Default:
200 ms
8-88
Nugg
Configuration
Applications
SNMP
Yes
Yes
Co d e 39
Bar Codes
No
Advertisement
Table of Contents
Need help?
Do you have a question about the Data Collection PC and is the answer not in the manual?
Questions and answers