Configure The Mirror Function - Zte ZXHN H3600 Maintenance Management Manual

ZXHN H3600 Maintenance Management Guide
Figure 8-7 Restore Configuration Management Page
2. Click Browse to select the user configuration file, and then click Restore Configura-
tion to restore the device to the user configuration.

8.4 Configure the Mirror function

This procedure introduces how to perform the mirror configuration.
If the mirror configuration is performed, the packets at the WAN side will be copied to the
specified LAN interface, and it can be used for the network analysis and troubleshooting.
Steps
1. On the main page of the ZXHN H3600, select Management&Diagnosis > Mirror
Configuration to the Mirror Configuration page, see
Figure 8-8 Mirror Configuration Page
2. Configure the mirror configuration parameters.
Table 8-3
Table 8-3 Parameter Descriptions for the Mirror Configuration
Parameter
Mirror
Source
Destination
3. Click Apply button to apply the changes.
84
lists the user mirror configuration parameters.
Description
Click On to enable the mirror function.
Click Off to disable the mirror function.
Network-side WAN interface.
User-side LAN interface.
SJ-20201203151144-003 | 2021-06-16(R1.0)
Figure 8-8.