Configure The Mirror Function - Zte H3140 Maintenance Management Manual

H3140 Maintenance Management Guide
Figure 7-6 User Configuration Management Page
2. Backing up your user configuration file
a. Click Backup Configuration. The File Download dialog box is displayed.
b. Click Save and select a storage path.
3. Restoring your backup user configuration file
a. Click Browse to select a backup file to be restored.
b. Click Restore Configuration.
After the restoration operation is completed, the device is automatically restarted,
causing temporary service interruption, so perform this operation with care.

7.5 Configure the Mirror function

Abstract
This procedure introduces how to perform the mirror configuration.
If the mirror configuration is performed, the packets at the WAN side will be copied to the
specified LAN interface, and it can be used for the network analysis and troubleshooting.
Steps
1. On the main page of the H3140, select Management&Diagnosis > Mirror Configu-
ration to the Mirror Configuration page, see
80
Note
Figure 7-7.
SJ-20210621164956-009 | 2021-12-07(R1.0)