Table of Contents
Advertisement
About this document
1
About this document
1.1
Applicable documents
All available documents for the product è www.festo.com/sp.
Document
Operating instructions for automation system
CPX-AP-I
Tab. 1: Applicable documents
1.2
Product version
This document refers to the following product versions:
Product
CPX-AP-I-4DI4DO-M12-5P
Tab. 2: Product version
The product version can be determined from the product labelling.
There may be an updated version of this document for this or later product versions
è www.festo.com/sp.
1.3
Product labelling
The product labelling is located on the right-hand side of the module. The Data Matrix code is on
the connection side. Scanning the printed Data Matrix Code with an appropriate device opens the
Festo Support Portal with the information appropriate for the product. Alternatively, the Product Key
(11-digit alphanumeric code on the product labelling) can be entered in the search field of the Support
Portal è www.festo.com/sp.
1.4
Specified standards
Version
IEC 60204-1:2016-10
IEC 61131-2:2017-08
Tab. 3: Standards specified in the document
4
Contents
Instruction manual and important information on
assembly, electrical installation and maintenance
tasks as well as description of the automation
system CPX-AP-I
Version
Digital input/output module CPX-AP-I-4DI4DO-M12-5P revision 1
or later
EN 60204-1:2018-09
EN 60529:1991-10
Festo — CPX-AP-I-4DI4DO-M12-5P — 2022-03a
Advertisement
Table of Contents
