Safety Information; Conventions Used - Alcatel-Lucent 1665 Installation Manual

Data multiplexer (dmx)
Hide thumbs Also See for 1665:
Table of Contents

Advertisement

About this document
............................................................................................................................................................................................................................................................
Index
The Index supplies users with specific subjects and corresponding page numbers to find
necessary information.

Safety information

This information product contains hazard statements for your safety. Hazard statements
are given at points where safety consequences to personnel, equipment, and operation may
exist. Failure to follow these statements may result in serious consequences.
Safety precautions
Adhere to the following safety precautions:
Electrostatic discharge (ESD)
You must be properly grounded when making contact with the 1665 Data Multiplexer
(1665 DMX) frame and handling circuit packs. Wrist strap ground cords should be
routinely tested for the minimum 1-megohm resistance.
Plug-in storage
Circuit packs should be stored in static-safe packaging or in a grounded cabinet.
For additional safety precautions, please see the 1665 Data Multiplexer (1665 DMX) User
Operations Guide.
Laser safety
For more detailed information and safety precautions, refer to
and classifications and Electrostatic Discharge (ESD)

Conventions used

Italic typeface denotes a particular product line or information product.
Helvetica Bold
TL1 Command Builder.
Helvetica typeface indicates a faceplate or Alcatel-Lucent 1665 DMX label designation,
as in the ACTIVE LED on a circuit pack.
............................................................................................................................................................................................................................................................
x v i
CAUTION
Laser safety
When connecting fiber loops between the IN and OUT ports on optical circuit
packs, always connect to the IN port first and then the OUT port. This will
prevent any optical radiation from being present at the fiber end.
typeface signifies a window, section, command or parameter used with the
Appendix A, "Laser safety
considerations".
Issue 2 March 2008
365-372-304R7.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents