Xerox AltaLink B80 series User Manual page 85

• Off: This option is the default setting.
• Both Pages: This option scans both pages of an open book onto two sheets of paper.
• Left/Right Page Only: This option scans the left or right page of an open book onto a single
sheet of paper.
5. If Binding Edge Erase is required, touch More. Touch the Binding Edge Erase field. To enter the
amount to erase, use the numeric keypad, or touch the arrows. You can erase up to 50 mm (2 in.)
from both pages, or 25 mm (1 in.) from one page.
6. Touch OK.
C C r r e e a a t t i i n n g g a a B B o o o o k k l l e e t t
The Booklet Creation feature prints two pages on each side of the paper. The printer reorders and
reorients the pages so that they are in the correct order and orientation when folded. If more
finishing options are available, the pages can be stapled and folded to create a booklet.
To create a booklet:
Note: In this mode, the printer scans all the original documents before it prints the copies.
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Booklet Creation.
4. Select one of the following options.
• Off: This option is the default setting.
• On: This option enables Booklet Creation.
Note: If Paper Supply is set to Auto Paper Select, the Paper Conflict screen appears. Select
the required paper tray, then touch OK.
5. To change the Original Input, Paper Supply or finishing options, touch More, then select an
option.
• To scan 1 or 2-sided originals, touch Original Input, then select an option.
• To change the paper source for the booklet, touch Paper Supply, then select an option.
• If your printer has a finisher installed, for Fold & Staple, select a staple or fold option.
6. Touch OK.
A A d d d d i i n n g g C C o o v v e e r r s s
You can print the first and last pages of your copy job on different paper, such as colored or
heavyweight paper. The printer selects the paper from a different tray. The covers can be blank or
printed.
To add covers to your copy job:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Special Pages→Covers.
Note: If Paper Supply is set to Auto Paper Select, the Paper Conflict screen appears. Select
the required paper tray, then touch OK.
4. For Covers Options, select an option.
Xerox ® AltaLink ® B80XX Series Multifunction Printer
®
Xerox Apps
85
User Guide