Xerox AltaLink B80 series User Manual page 47

• If AirPrint is not available on your device, contact your Xerox representative.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
Note: If you do not know the IP address for your printer, refer to
Your Printer.
2. In the Embedded Web Server, click Properties→Connectivity→Setup.
Note: If this feature does not appear, log in as a system administrator. For details, refer to
the System Administrator Guide at www.xerox.com/support/ALB80XXdocs.
3. For Mobile Workflows, for AirPrint, click Edit.
4. Configure HTTP, IPP, and Multicast DNS Registration as required. To configure a protocol, click
Edit.
5. To enable AirPrint, for Enablement, select one or both options:
• Allow Printing/Faxing to be initiated From AirPrint Supported Devices
• Allow Scanning to be initiated From AirPrint (or Mopria) Supported Devices
Note:
• AirPrint Faxing is supported only on devices that have embedded fax enabled and are
configured to allow sending.
• AirPrint Printing/Faxing is enabled by default.
• To require authentication for AirPrint Printing and Faxing, configure IPP authentication.
• Enabling scanning for AirPrint also enables scanning for Mopria.
6. For Require Authentication for Scanning, select an option:
• Off: This option allows the device to scan without requiring authentication.
• HTTP Basic: This option authenticates with user accounts that are configured in the device
user database or in the network database.
Note: HTTP Basic sends user login credentials as plain, unencrypted text over HTTP. To
send encrypted login credentials, use HTTPS.
• HTTP Digest: This option authenticates with user accounts that are configured in the device
user database.
7. If you selected HTTP Basic authentication, for Validation Location, select an option:
• Validation on the Device: This option enables IPP authentication of user accounts that are
configured in the device user database.
• Validation on the Network: This option enables IPP authentication of user accounts that are
configured on the network authentication server for the device.
Note: The same network authentication configuration is used on the printer for each login
method that is configured for Network Authentication.
8. To edit the device name or location, for Device Name, Device Location, or Geographic Location,
click Edit.
Note: Providing a device name can help users identify the device.
9. Click Save.
For additional information about AirPrint configuration and settings, refer to the System
Administrator Guide at www.xerox.com/support/ALB80XXdocs.
Xerox ® AltaLink ® B80XX Series Multifunction Printer
Getting Started
Finding the IP Address of
User Guide
47