Xerox AltaLink B80 series User Manual page 176

Paper and Media
• Load plain transparencies face down with the long edge leading into the printer. Load striped
transparencies with the stripe face up on the edge leading into the printer.
Note: Do not load paper-backed transparencies in Tray 5.
• For short-edge feed, insert letterhead and pre-printed paper face up with the top edge leading
into the printer. Load hole-punched paper with the holes toward the rear of the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the
printer to jam.
4. Adjust the width guides until they touch the edges of the paper.
5. At the control panel, select the correct paper size, type, and color:
176 Xerox ® AltaLink
User Guide
® B80XX Series Multifunction Printer