Xerox AltaLink B80 series User Manual page 175

L L o o a a d d i i n n g g P P a a p p e e r r i i n n T T r r a a y y 5 5
Tray 5 is located on the left side of the printer. You can close the tray when it is not in use. You can
use the tray for small jobs or for jobs that use special media such as labels, transparencies, and
envelopes.
When the printer detects media in Tray 5, the control panel displays the paper settings for the tray.
Confirm or change the settings for the media that is loaded in the tray.
Note: Ensure that you select the correct media type for the paper that is loaded in the tray.
The printer detects different types of media as each page travels through the paper path. If a
paper-type setting does not match the paper type loaded in the printer, the job stops printing.
To load paper in Tray 5:
1. Open Tray 5, then for larger paper sizes, pull out the extension tray. Remove any paper that is a
different size or type.
2. Move the width guides to the edges of the tray.
3. Load the paper in the tray.
• For long-edge feed, insert letterhead and pre-printed paper face up with the top edge toward
the front of the tray. Load hole-punched paper with the holes to the right.
• Load labels face down, long-edge or short-edge feed.
Xerox ® AltaLink ® B80XX Series Multifunction Printer
Paper and Media
175
User Guide