Xerox AltaLink B80 series User Manual page 236

Troubleshooting
9. At the control panel, if a prompt appears, select the correct paper size, type, and color.
• To select a new paper size, touch Size.
• To select a new paper type, touch Type.
• To select a new paper color, touch Color.
• To confirm the settings, touch Confirm.
Note: If a prompt does not appear, and you have changed the paper size, type, or color,
update the Required Paper Policies. For details, refer to the System Administrator Guide at
www.xerox.com/support/ALB80XXdocs.
10. To return to the Home screen, press the Home button.
C C l l e e a a r r i i n n g g P P a a p p e e r r J J a a m m s s f f r r o o m m T T r r a a y y s s 3 3 a a n n d d 4 4
To resolve the error that appears on the control panel, follow the instructions provided and remove all
paper from the Tray 3 and Tray 4 areas.
1. Open the left side door of the printer. Remove any jammed paper from the left side door areas.
2. Close the left side door, then wait 10 seconds. Any paper currently in transport inside the printer
moves to the left side area.
3. Open the left side door. Remove any jammed paper from the left side door areas.
4. Pull out the tray until it stops.
Note: If you are unable to open Tray 4 completely, paper may be jammed behind the tray.
a. Close Tray 4.
b. To access the area behind Tray 4, remove Tray 2.
c. Remove any damaged paper from behind Tray 4.
d. Replace Tray 2.
e. Open Tray 4.
236 Xerox ® AltaLink
User Guide
® B80XX Series Multifunction Printer