Xerox AltaLink B80 series User Manual page 224

Maintenance
Moving the Printer
Before you move the printer:
• Ensure that you always power off the printer and wait for it to shut down completely.
• Ensure that no jobs are in the print queue.
• Disconnect the power cord and other cables from the back of the printer.
• Unlock the printer casters.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can
damage it, which can lead to fire or electric shock.
Note:
• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the
printer more than 10 degrees can cause toner spillage.
• When moving the printer over a long distance, remove the print cartridge and toner
cartridges to prevent toner from spilling. Ensure that the printer is protected with
appropriate packaging. For assistance, contact your Xerox representative.
Caution: Do not expose the print cartridge to direct sunlight or strong indoor fluorescent
lighting. Do not touch or scratch the surface of the print cartridge.
Caution: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
Xerox ® Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage to
the printer caused by improper moving.
After you move the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
4. Lock the printer casters.
224 Xerox ® AltaLink
User Guide
® Warranty, Service Agreement, or Total Satisfaction Guarantee. The
® B80XX Series Multifunction Printer