Xerox AltaLink B80 series User Manual page 210

Maintenance
7. Rotate the staple-head movement wheel counterclockwise, until it is back in position.
8. Close the finisher door.
Replacing Staples in the Booklet Maker for the Office Finisher
1. Open the finisher door.
2. Locate the staple cartridges in the upper left part of the cavity at the bottom of the unit.
3. To remove a staple cartridge, pull the orange tab on the cartridge to the right and then down.
210 Xerox ® AltaLink
User Guide
® B80XX Series Multifunction Printer