Xerox AltaLink B80 series User Manual page 25

Item Name
5 Status LED
6 Notification Area
7 Interrupt Button
8 Pause Button
9 Language Button
10 Reset
Description
This light blinks blue or amber to indicate printer status.
Blue
• Blinks blue once to acknowledge a successful Authentication
request.
• Blinks blue once slowly for a copy or print job initiated at the
control panel.
• Blinks blue twice slowly for fax or print job received from the
network.
• Blinks blue rapidly while the printer is powering up, or to signal
detection of a Wi-Fi Direct connection request.
Amber
• Blinks amber to indicate an error condition or warning that
requires your attention. For example, an out-of-toner condition,
a paper jam, or out of paper for the current job.
• Blinks amber to indicate a system error, which typically is
associated with an error code.
Notifications are displayed above the Apps area. To view the full
notification, touch the notification area. After you have reviewed
the information, touch X.
This button pauses the current job to run a more urgent job.
Note:
This option may be hidden from view. To enable
Interrupt, refer to the System Administrator Guide at
xerox.com/support/ALB80XXdocs.
Use this button to pause the current job. The job pauses with the
option to resume printing or delete the job.
The Language button allows you to set the language that appears
temporarily on the control panel display.
Note:
This option may be hidden from view. For details,
see the System Administrator Guide at
support/ALB80XXdocs.
Note:
Use the Reset button to reset all the apps to their
default settings.
Xerox ® AltaLink ® B80XX Series Multifunction Printer
Getting Started
www.
www.xerox.com/
25
User Guide