Xerox AltaLink B80 series User Manual page 170

Paper and Media
5. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are
ready to use it.
6. Load paper in the tray. Position the paper against the left side of the tray.
• For long-edge feed, insert letterhead and pre-printed paper face down with the top edge
toward the front of the tray. Load hole-punched paper with the holes to the left.
• Load labels face up with the top edge toward the front of the tray.
• Load paper-backed transparencies face up in the tray. Load striped transparencies with the
stripe face down on the left edge of the tray.
Note: Load transparencies in Tray 2 only.
170 Xerox ® AltaLink
User Guide
® B80XX Series Multifunction Printer