Xerox AltaLink B80 series User Manual page 228

Troubleshooting
Probable Causes
There is a wireless or network connectivity issue.
Incorrect print driver.
P P r r i i n n t t i i n n g g T T a a k k e e s s T T o o o o L L o o n n g g
Probable Causes
The printer is set to print on a paper type that
requires slower printing.
The printer is in Power Saver mode.
The way the printer was installed on the network
could be an issue.
The job is complex.
Certain jobs, such as jobs using the booklet maker,
take longer to process.
228 Xerox ® AltaLink
User Guide
® B80XX Series Multifunction Printer
Solutions
To test the printer, print an Information Page, such as
the Configuration Report. If the page prints, there
could be a wireless or network connectivity issue.
Contact your system administrator or refer to the
System Administrator Guide at System Administrator
Guide at www.xerox.com/support/ALB80XXdocs.
Check that you have the latest print driver installed.
For details, go to www.xerox.com/support/
ALB80XXsupport.
Solutions
Certain paper types, like heavyweight paper and
transparencies, take more time to print. Ensure that
the print driver and control panel are set to the
proper paper type.
Wait. It takes time for printing to start after the
printer exits Power Saver mode.
• Determine if a print spooler or a computer sharing
the printer is buffering all print jobs and then
spooling them to the printer. Spooling can slow
print speeds.
• To test the speed of the printer, print multiple
copies of an Information Page, such as the
Configuration Report. If the page prints at the
rated speed of the printer, there could be a
network or printer installation issue. For more
help, contact the system administrator.
Wait. No action needed.