2. Commissioning
1
1
Connected device
Fig. 2/12: Parameterisation of bus nodes and connected I-Port devices
2.6.3 Parameterisation of the bus node
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English
2
Note
Module parameters can refer to:
– properties of a complete I-Port device
– properties of an individual channel of an I-Port device.
–
Diagnostics (DIL switch element 11, see chap. 1.4.2)
–
Fail state (DIL switch element 12, see chap. 1.4.2)
–
Tool change mode (software parameters, see chap. 2.6.4)
List field with available values
2
2-33