Festo CTEU-PB Electronics Description page 58

2. Commissioning
2-22
3. Select the module "CTEU-PB".
The dialogue window "Properties - PROFIBUS interface"
opens automatically (3, see Fig. 2/6).
4. Select the tab "Parameters" and there the station address
that you set at the bus node using DIL switches (see
chap. 1.4.2)
5. Click on "OK" in the "Properties" dialogue window to
complete the setting of the PROFIBUS sub-network.
A graphic symbol of the bus node is linked in the main
window with the line view of the PROFIBUS sub-network
(5, see Fig. 2/6).
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English