Festo CTEU-PB Electronics Description page 56

2. Commissioning
2-20
11. Select your CPU from the Hardware Catalogue (precise
comparison with your hardware required!) and drag the
corresponding element (symbol) into a line of the rack rail
window ( 3 or 4 in Fig. 2/4).
Note: Slot 1 is reserved and cannot be used for the con-
figuration.
The dialogue window "Properties - PROFIBUS interface
DP" opens automatically (see Fig. 2/5).
Fig. 2/5: Edit the sub-network properties
12. Select the tab "Parameters" or "Network Settings" and
there the station address that you set at the bus node
using DIL switches (see chap. 1.4.2)
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English