Load Identification Properties Into The Bus Node Using Step - Festo CTEU-PB Electronics Description

2. Commissioning
Address/ Designation, size
structure,
I&M18 ... Profile-specific I&M functions
I&M098
(65018 ...
65098)
I&M100 ... Manufacturer-specific I&M
I&M199 functions
(65100 ...
65199)
Tab. 2/7: I&M data structures (data records)

2.5.2 Load identification properties into the bus node using Step 7

Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English
Description
Support through CTEU-PB: no
Support through CTEU-PB: no
– Module-related I&M data are not supported.
– Every data structure always comprises 64 bytes.
– The I&M data structures are read with the "call service"
from the bus node or written into the device.
1. Mark the bus node in HW Config.
2. Click on [Download Module Identification...] in the [PLC]
menu.
The corresponding dialogue window is displayed (see
Fig. 2/8).
3. Enter your identification properties into the data fields
under "Offline" (example, see Fig. 2/8).
4. Activate the checks under "Include" only for the data
fields for which you wish to load data into the bus node.
Deactivate checks for the already correctly filled-out data
fields in the "ONLINE" field, or they will be overwritten!
Use
obligatory/
optional
Optional
Optional
2-27