Contents and general safety instructions
Target group
Service
Instructions on this description
VIII
This description is intended exclusively for technicians
trained in control and automation technology who have
experience in installing, commissioning, programming and
diagnosing programmable logic controllers (PLCs) and
participants on the PROFIBUS-DP fieldbus.
Please consult your local Festo Service if you have any tech-
nical problems.
This description includes specific information about the con-
figuration, parameterisation, commissioning, programming
and diagnostics of the bus node with the PROFIBUS-DP field-
bus protocol.
Information for mounting the bus node on the CAPC-... elec-
trical connection box can be found in the assembly instruc-
tions supplied with the electrical connection box.
Information about other bus nodes and components of the
CTEU... product family can be found in the product document-
ation for the respective product.
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English