Festo CTEU-PB Electronics Description page 55

2. Commissioning
3
4
1
Select control system
2
Insert rack rail
Fig. 2/4: Set up control system (PLC/DP Master) - insert rack rail (Rail)
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English
3
8. Select your control system (PLC/DP Master) in the Hard-
ware Catalogue (e.g. "SIMATIC 300", 1 in Fig. 2/4):
Click on the Plus symbol to expand the selection.
9. Open the rack folder (e.g. "RACK-300", 2 in Fig. 2/4) for
selection of a rack rail.
10. Double click on the rack rail symbol (e.g. "Rail", 2 in
Fig. 2/4).
A sub-window (with rack rail symbol in the header) opens
in the left area of the HW Config window ( 3 and 4 in
Fig. 2/4).
The sub-window symbolises the rack rail (profile rail) of
your control system. You compile the individual elements
in this sub-window and thus form the basis for your
PROFIBUS automation system.
Set up control system in the rack rail
window
1
2
2-19