Installation On A Higher-Level Controller; Device Master File (Gsd) And Symbol Files - Festo CTEU-PB Electronics Description

2. Commissioning
2.3

Installation on a higher-level controller

2.3.1 Device master file (GSD) and symbol files

Procurement source
GSD files
Symbol files
2-10
A device master file (GSD) is needed for configuration and
programming of the bus node with a programming unit or PC.
The GSD includes all required information for adjustment of
the bus node using configuration and programming software,
e.g. Siemens SIMATIC STEP 7.
Current GSD and symbol files can be found on the Festo web-
site at www.festo.com
"GSD".
You will require one of the following files for the bus node:
– FEST0D67.GSD (German version)
– FEST0D67.GSE (International version)
For some older controllers, the GSD file can be too large for
the available memory capacity. In this case, contact Festo's
Technical Hotline.
Contact data can be found on the Festo website at
www.festo.com
Use the following symbol files to represent the bus node and
its statuses in your configuration software:
Normal opera-
ting status
File: CTEU_PB.dib
Tab. 2/2: Symbol files for configuration software
Support/Downloads
Contact.
Diagnostic case
File: CTEU_PBD.dib
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English
Search
Special operating
status
File: CTEU_PBS.dib