Connection And Display Components - Festo CTEU-PB Electronics Description

1. Installation

1.2.1 Connection and display components

4
3
1
Power supply connection for bus node
and connected devices, if applicable
(e.g. valve terminal)
2
Fieldbus connection (D-sub plug)
Fig. 1/1: Connection and display components on the bus node
1-6
The following electrical connection and display components
can be found on the bus node (see Fig. 1/1):
3
4
DIL switch group 1 and 2
Status LEDs (status display/dia-
gnostics chap. 3.2)
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English
1
2