Festo CTEU-PB Electronics Description page 54

2. Commissioning
2-18
3. Enter a project name (e.g. "CTEU-PB") in the input field
"Name" of the "New" dialogue window and confirm the
input with "OK".
The new automation project is now set up.
Setting up the controller system (PLC/Master)
4. Select the newly set-up automation project in the left
part of the dialogue window and click on [Insert] - [Sta-
tion] to select the hardware type of your controller
(e.g. "SIMATIC 300 Station").
The selected hardware now appears in the right part of
the dialogue window.
5. Open the automation project by clicking on the Plus
symbol in the left part of the dialogue window.
Equip control system (PLC/DP Master)
6. Click on the Station symbol (which is located to the left
of the station name) and double-click on the Hardware
symbol under "Object name" in the right part of the dia-
logue window.
The "HW Config" hardware configuration window opens.
7. Open the Hardware Catalogue ( 1 ) via the toolbar.
1
Festo P.BE-CTEU-PB-OP+MAINT-EN en 1208NH English