Turning Bluetooth On The Prosthesis On/Off; Switching Bluetooth Off/On Using The Cockpit App; Querying The Prosthesis Status; Query Status Through Cockpit App - Otto Bock Genium X3 3B5-3 Instructions For Use Manual

Use
Parameter
Volume

9.3 Turning Bluetooth on the prosthesis on/off

INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the Cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down (function only available in
basic mode) or by connecting/disconnecting the battery charger. Bluetooth is then turned on for approx. 2
minutes. During this time, the app must be started and used to establish a connection. If required, Bluetooth on
the prosthesis can be switched on permanently afterwards (see page 94).
INFORMATION
Basic mode (mode 1) has to be active to turn off Bluetooth. If a MyMode is activated, one has to switch to basic
mode to turn off Bluetooth.

9.3.1 Switching Bluetooth off/on using the cockpit app

Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Deactivate Bluetooth".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Turn the component over or connect/disconnect the battery charger.
→ Bluetooth is switched on for approx. 2 minutes. During this time, the app must be started in order to estab­
lish a connection to the component.
2) Follow the on-screen instructions.
→ If Bluetooth is switched on, the

9.4 Querying the prosthesis status

9.4.1 Query status through cockpit app

1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".

9.4.2 Status display in the cockpit app

Menu option
Trip
Step
Service
Batt.
Stb/Act: 58/29
94
Adjustment soft­ Setting range,
ware range app
0–4 0–4
symbol appears on the screen.
Description
Daily step counter (steps with the
prosthesis side)
Total step counter (steps with the
prosthesis side)
Display of the next maintenance date For informational purposes only
Current prosthesis charge level, as a
percentage
Estimated remaining operating time
of prosthesis in hours. Rest mode
(Stb) e.g. 58 hours, active use (Act)
e.g. 29 hours
Meaning
Volume of beep signal for confirmation tones
(e.g. when checking the charge level, switch­
ing MyModes). The "0" setting deactivates
the audible feedback signals. However,
warning signals are still generated if errors
occur.
Possible actions
Reset the counter by tapping the
"Reset" button.
For informational purposes only
For informational purposes only
For informational purposes only
Genium X3 3B5-3/3B5-3=ST