Switching Bluetooth Of The Component On/Off; Switching Off Bluetooth; Switching On Bluetooth; Querying The Status Of The Component - Otto Bock 17KO1 Series Instructions For Use Manual

Use
Switching off
1) Briefly press the
button lights up green
2) With the product switched on, press and hold the
turns off and a descending series of beeps (shut-down melody)
Switching on
► Press the button on the control panel to switch the product on.
→ A long vibration signal followed by a short beep is emitted, and the current status is displayed for about
5 seconds (see Page 51).
→ When the symbol in the
→ Basic mode is activated after switching on.
INFORMATION
No display after switching on
If the symbol does not light up after a long press of the
ging for at least 15 minutes is required in this case.

10.6 Switching Bluetooth of the component on/off

INFORMATION
Bluetooth on the component must be turned on in order to use the Cockpit app. Briefly press the
control panel to check. In the
If the symbol in the button is not lit up, Bluetooth has to be switched by a long press of the

10.6.1 Switching off Bluetooth

► With the Bluetooth function activated, press and hold the
emitted and the symbol in the button turns off.
→ Bluetooth is switched off.
→ To check whether the Bluetooth function was deactivated correctly, query the status by pressing the
(see Page 51).

10.6.2 Switching on Bluetooth

► With the Bluetooth function deactivated, press and hold the
signal is emitted and the symbol in the button lights up blue .
→ Bluetooth is switched on.
→ To check whether the Bluetooth function was activated correctly, query the status by pressing the
(see Page 51).

10.7 Querying the status of the component

10.7.1 Query status through cockpit app

1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".

10.7.2 Status display in the cockpit app

Menu option
Steps per day: 25
Overall steps: 1745
Batt.: 68

10.8 Recommendations for air travel

Observing the following points is recommended prior to air travel or on board the airplane:
• Take along the 647F558 orthotic passport so you can show it on request or in case of questions.
• Turn off the component's Bluetooth function on board the aircraft if required (see Page 42).
42
button on the control panel to check whether the product is switched on. The symbol in the
and the current charge level is displayed (see Page 51).
button is lit up green
button, the symbol must be lit up blue .
Description
Daily step counter
Total steps since most recent main­
tenance
Current charge level of the compon­
ent in percent
button on the control panel until the symbol in the button
is emitted.
, the product is switched on and operational.
button, the battery may be deep discharged. Char­
button on the control panel until a vibration signal is
button on the control panel until a short vibration
Possible actions
Reset the counter by tapping the
"Reset" button.
For informational purposes only
For informational purposes only
button on the
button.
button
button
C-Brace joint unit 17KO1=*